| 频率 | 10kHz. |
|---|---|
| 测量范围 | 60A/600A/6000A |
| 材质 | Alcryn 2070 NC，Latene 7H2W V0 |
| 测量电压范围 | 1000V AC rms或DC |
| 产地 | 德国 |
| 结构类型 | 互感器式钳形表 |
| 类型 | 电流钳形表 |
| 售后服务 | 上门服务 |
| 显示方式 | 数字式 |
| 执行质量标准 | 国标 |
| 准确度等级 | ±1% |
| 经营模式 | 自产自销 |
| 品牌 | GMCI高美测仪 |
| 型号 | ACP6000 |
| 钳口直径 | 9.9 mm |
The ACP 6000_3 is an AC current Probe utilising the Rogowski
principle. It can be used to measure currents up to 6000 Amps from
very low frequencies to 10kHz.
The flexible and lightweight measuring head allows quick and easy
installation in hard to reach areas and with large conductors.
Electrical Characteristics
Current Ranges (selectable via rotary switch) .......... : 60A / 600A / 6000A ACRMS
Output Sensitivity (AC coupled) ................................ : 50mV / 5mV / 0.5mV per A
Accuracy (at 25°C) .................................................... : ± 1% of reading ± 0.1A (60A range)
................................................................................... : ± 1% of reading ± 1A (600A / 6000A range)
Load Impedance ........................................................ : 100kΩ minimum
Linearity ............................. : ± 0.2% of reading
Noise ......................................................................... : 80mA (60A) / 400mA (600A / 6000A range)
Bandwidth (-1dB) ....................................................... : 10Hz to 10kHz
Phase Error (45 – 65Hz) ........................................... : ± <1o
Temperature Coefficient ............................................ : ± 0.1% of reading / °C
Position Sensitivity .................................................... : ± 2% of reading
External Field (with cable > 100mm from the head) . : ± 0.2% of range
Power Supply ............................................................ : 2 x AA MN 1500 LR6 Alkaline
................................................................................... : 2000 hours, low battery indicator
................................................................................... : external power supply (3V / 100mA)
Overload Indication ................................................... : Red LED ON indicates the range overload
Working Voltage (see Safety Standards section) ..... : 1000V AC RMS or DC (Probe and Integrator)
................................................................................... : 30V max (Output)
General Characteristics
Probe and Cable Material ......................................... : Alcryn 2070 NC, LATENE 7H2W V0
Probe Cable Length (s) ............................................. : 610mm (24”) / 915mm (36”) / 1220mm (48”) / 2490mm (98”)
Probe Cable Diameter ............................................... : 9.9 mm (nominal)
Cable Length (Probe to Integrator box) .................... : 2 m
Output ........................................................................ : 0.5m long lead terminated with
................................................................................... : a safety male BNC
Operating Temperature Range ................................. : -20 to +65°C
Storage Temperature Range .................................... : -40 to +75°C
Operating Humidity.................................................... : 15% to 85% (non condensing)
Degree of protection .................................................. : IP65 Probe, IP40 Integrator module
Colour ........................................................................ : RAL 120 70 75 Lemon green,
19228131880微信