| Type | DSH TN 255 |
| Part No. | 941 200 |
| SPD according to EN 61643-11 / IEC 61643-1/-11 | Type 1 / Class I |
| Energy coordination with terminal equipment | Type 1 + Type 2 |
| Energy coordination with terminal equipment (≤ 5 m) | Type 1 + Type 2 + Type 3 |
| Nominal a.c. voltage (UN) | 230 V |
| Max. continuous operating a.c. voltage (UC) | 255 V |
| Lightning impulse current (10/350 μs) [L+N-PE] (Itotal) | 25 kA |
| Specific energy [L+N-PE] (W/R) | 156.25 kJ/ohms |
| Lightning impulse current (10/350 μs) [L, N-PE] (Iimp) | 12.5 kA |
| Specific energy [L,N-PE] (W/R) | 39.06 kJ/ohms |
| Nominal discharge current (8/20 μs) (In) | 12.5 / 25 kA |
| Voltage protection level [L-PE]/[N-PE] (UP) | ≤ 1.5 /≤ 1.5 kV |
| Follow current extinguishing capability a.c. (Ifi) | 25 kArms |
| Follow current limitation/Selectivity | no tripping of a 32 A gL/gG fuse up to 25 kArms(prosp.) |
| Response time (tA) | ≤ 100 ns |
| Max. mains-side overcurrent protection | 160 A gL/gG |
| Temporary overvoltage (TOV) [L-N] (UT) | 440 V / 5 sec. |
| TOV characteristic | withstand |
| Operating temperature range (TU) | -40 °C...+80 °C |
| Operating state/fault indication | green / red |
| Number of ports | 1 |
| Cross-sectional area (L, N, PE,9) (min.) | 1.5 mm2solid/flexible |
| Cross-sectional area (L, N, PE,9) (max.) | 35 mm2stranded/25 mm2flexible |
| For mounting on | 35 mm DIN rails acc. to EN 60715 |
| Enclosure material | thermoplastic, red, UL 94 V-0 |
| Place of installation | indoor installation |
| Degree of protection | IP 20 |
| Capacity | 2 module(s), DIN 43880 |
| Approvals | KEMA, UL |
| Weight | 250 g |
| GTIN | 4.01336E+12 |
| PU | 1 pc(s) |
| Part No. | 941 200 |
